|
| IAQ-700 |
IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust.
Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee.
After install indoor Watch (software), it enable to collect data at a long distance.
Relay Contact make it possible to interwork with a ventilating system.
It has been installed to measure Air quality of indoor or underground spaces like Factories, schools, Public places etc. |
|
|
| |
| [ Features ] |
Multi Gas Measurement |
| Measurement of VOC, CO2, Dust, Temperature and humidity at the same time. |
ZigBee wireless communication |
| Can reach max 1.2Km in case of non-obstacle. |
Real time storage of data |
| ‘Indoor Watch’ program enable to transmit data in real time at a long distance |
Digital Process |
| Measurement of VOC, CO2, Dust, Temperature and humidity at the same time. |
LCD Display with Back-Light |
Relay Signal-Output |
| Provide 2 Step-Relay Contact and interwork with a ventilating system |
| |
| [ Specification
] |
|
|
| Segment |
Specification |
| VOC |
Detection principle |
Semiconductor or PID |
| Measurement range |
0 ~ 1000 ppm |
| Resolution |
1 ppm |
| Accuracy |
£ ±3%/Full Scale |
| Response time |
within 20 seconds, 90%/full scale |
| CO2 |
Detection principle |
NDIR |
| Measurement range |
400 ~ 10,000 ppm |
| Resolution |
10 ppm |
| Accuracy |
≤2% /full scale |
| Response time |
Within 30 sec (T90) |
| DUST |
Detection principle |
Light Scattering |
| Measurement range |
0 ~ 500 ㎍/㎥ |
| Resolution |
1 ㎍/㎥ |
| Accuracy |
£ ±3%/Full Scale |
| Response time |
Within 10 sec (T90) |
| Temperature |
Detection principle |
Thermister |
| Measurement range |
-25 ~ 60 ℃ |
| Resolution |
0.2 ℃ |
| Accuracy |
£ ±2%/Full Scale |
| Response time |
Within 10 sec (T90) |
| Humidity
|
Detection principle |
Thin Film electronic capacity |
| Measurement range |
0 ~100%RH |
| Resolution |
0.4% RH |
| Accuracy |
£ ±3%/Full Scale |
| Response time |
Within 15 sec (T90) |
| Communication |
ZigBee |
| Input power |
DC9V ~ DC24V |
| Density Display |
320×240 DOT Graphic LCD Display |
| Alarm Display |
AL-1,AL-2 LED(RED) |
| Alarm Output |
2 Step RELAY CONTACT |
| Operation Temperature |
-10℃ ~ 70℃ |
| Operation Humidity |
5 ~ 95%RH (Non-Condensing) |
| Installation |
Wall Mounting Type |
|
|
| |